Epoxy.com Product #695
Methyl Methacrylate Hardener (Hardening Powder - BPO)
Description
Epoxy.com Product #695 Hardener Powder (BPO) for Epoxy.com MMA Flooring
Systems is for use with Epoxy.com Products #691, #692, #693,
#697, #698 & #699. Epoxy.com Product #695 Hardener Powder (BPO) for Epoxy.com MMA Flooring Systems dosing can be changed due to temperature and desired set time / working time.
Epoxy.com Product #695 must be well mixed with Epoxy.com MMA before adding any
other aggregates and fillers. After mixing the Epoxy.com Product #695
Hardening Powder into Epoxy.com MMA the polymerization reaction which
leads to the hardening of the MMA begins.
Composition
Epoxy.com Product #695 is a white dry powder consisting of 50% BPO,
Dibenzoylperoxide.
Technical Data |
| Appearance |
Sandy, white dry powder |
Content of Dibenzoylperoxide and
Dicydohexlphtalate |
Approximately 50% |
| Self-accelerating decomposition temperature |
140°F |
| Self-ignition temperature |
>680°F |
| Solubility |
Not soluble in water |
Packaging |
|---|
| 1/2 pound Bag | | approximately 10 Volume Ounces |
| 5 pound |
1gallon Pail | approximately 100 Volume Ounces |
| 15 pound |
3 gallon Pail |
approximately 300 Volume Ounces |
| 55 pound |
Box | approximately 1,100 Volume Ounces |
Use
Epoxy.com Product #695 MMA Hardener Powder must be mixed just immediately
before the application of Epoxy.com MMA. All other powders and fillers must
be added after
Epoxy.com Product #692 and the Epoxy.com MMA resin have been well mixed
together. A dosing chart is shown below. Be sure to double check with
the individual technical data sheets for the Epoxy.com MMA you are mixing
with Epoxy.com Product #692.
Caution
Epoxy.com Product #692 is an oxidizing agent that violently decomposes
under the influence of heat or when it comes in contact with deducing
agents. Do Not mix With Accelerators.
Store separately from Epoxy.com MMA resins. Review MSDS information
completely before using this or any other Epoxy.com Products.
Storage
Store in tight containers in dry environments below 80°F.
Mix Ratios
|
PRODUCT |
SUBSTRATE/MATERIAL TEMPERATURE (°F) |
Epoxy.com Product #695 MMA Hardener (BPO)VOL OZ.PER GALLON OF RESIN |
|
#691 MMA Primer |
30°F |
12.7 |
| 40°F |
9.0 |
| 50°F |
7.5 |
| 60°F |
5.5 |
| 70°F |
3.5 |
| 90°F |
1.8 |
|
#692 MMA Flexible Membrane |
40° F |
8.0 |
| 50°F |
7.0 |
| 60°F |
5.0 |
| 70°F |
5.0 |
| 90°F |
3.0-4.0 |
| Epoxy.com #693 MMA |
40°F |
5.5 |
| 50°F |
4.5 |
| 60°F |
3.5 |
| 70°F |
2.0 |
| 90°F |
1.0-2.0 |
| 1 lb. by weight of Epoxy.com Product #695 equals
approximately 20 volume ounces. |
Information regarding Epoxy.com MMA resins and systems is based on extensive research and experience of the raw material
manufacturer. By making such information available Epoxy.com does not thereby assume any
liability beyond the express terms and conditions of our standard limited material warranty. Information is based on information that Epoxy.com believes to be correct, but Epoxy.com does not warrant the accuracy or completeness of any such information.
We reserve the right at any time and without notice to update or improve our products and process and our information concerning the same.
By Epoxy.com making this information available does not relieve the
purchaser or user from his obligations to verify the suitability of our
products and processes for the intended use or application.
|