Epoxy.com Product #676
Conductive Anti-Spark Epoxy Novolac Flooring
Highly Chemically Resistant Novolac Conductive Flooring
DESCRIPTION
Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive
Floor Coating is a 100% solids epoxy Novolac chemical resistant conductive
epoxy floor
coating ideal for severe chemical and solvent storage requiring conductive
and spark proof surfaces. Applied at a nominal 1/16", Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating offers the superior chemical resistance of an
Epoxy.com Novolac Epoxy Resin System
while maintaining a conductive surface.
ADVANTAGES
- Low viscosity for
improved handling during application.
- Exhibits excellent
resistance to strong acids, alkalis and most industrial chemicals and
solvents.
- 100% Solids low odor
application and cure (0-VOC).
- Bonds well to cool,
damp substrates.
- Conductive & non
sparking, 25,000 to 1,000,000 ohms resistance.
CONSIDERATIONS
- Substrate to receive Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating temperature
must be a minimum of 50°F.
- Substrate must be free
of dirt, waxes, curing agents and other foreign materials.
- Steel surfaces to receive Epoxy.com Product #676 Novolac
Epoxy Chemical Resistant Conductive Floor Coating must be
free of grease and oils. Abrasive blast to SSPC-SP-3.
- Refer to Epoxy.com Surface Preparation Guidelines for substrate requirements.
COMPOSITION
100% Solids, modified polyamine, cured epoxy novolac resin and fillers
APPLICATION
SURFACE PREPARATION
Surface Preparation is the most critical portion of any successful
resinous flooring system application. All substrates must be properly
prepared as outlined in Epoxy.com Surface Preparation Guidelines.
Contact epoxy.com technical service department is
pleased to answer any questions.
INSTALLATION
Installation of Epoxy.com Product #676 Novolac Novolac Epoxy
Chemical Resistant Conductive Floor Coating will vary with application.
Normally spread with a trowel or squeegee and lightly back-rolled with a
medium or short nap roller. Care should be taken to minimize the
entrapment of air caused by over rolling. For complete instructions, consult installation guide or Epoxy.com
Technical Support Department
CLEAN-UP
Clean skin with soap and water. Tools and equipment should be
cleaned with xylene or lacquer thinner.
COVERAGE
Epoxy.com Product #676 Novolac Epoxy Chemical
Resistant Conductive Floor Coating will yield approximately 32 mils when
spread at 50 ft2 per gallon. Two coats required. Epoxy.com
Check Epoxy.com Electrostatic Dissipative (ESD) and
Conductive Flooring Calculator to calculate
Epoxy.com Conductive and Electrostatic Dissipative (ESD) material
requirements for your installation.
COLOR
Epoxy.com Product #676 Novolac Epoxy Chemical
Resistant Conductive Floor Coating is available in Standard Colors and
Custom Colors as approved.
TECHNICAL DATA
| Viscosity @ 75°F |
1,000-1,500 cps |
| Mixing Ratio by volume |
2 Part A to 1 Part B by Volume |
| Solids Content by volume |
100% by volume |
| Volatile Organic Content |
0 |
| Weight per gallon, mixed |
11.0-11.5 lbs. per gallon mixed |
CURE/DRY TIME
| Pot Life |
20-25 min. @75°F |
| Dry to Touch |
6-7 hours @ 75°F |
| Re-Coat |
8-12 hours @ 75°F |
| Light Service |
24 hours @ 75°F |
| Full Cure & Maximum Resistance |
5 days |
CHEMICAL RESISTANCE
REAGENT |
RATING |
|---|
| Acetic Acid-10%, 30% |
R |
| Acetone | L |
| Ammonia Hydroxide-38% |
R |
| Beer |
R |
| Bleach | L |
| Brake Fluid |
R |
| Citric Acid-30% |
R |
| Citric Acid-40% |
R |
| Crude Oil |
R |
| Diesel Fuel |
R |
| Ethylene Glycol |
R |
| Fatty Acids |
R |
| Gasoline |
R |
| Hydrochloric Acid-37% |
R |
| Lactic Acid-50% |
R |
| Lactic Acid-80% |
R |
| Methyl Ethyl Ketone |
R |
| Methylene Chloride |
L |
| Nitric Acid-10% |
R |
| Peroxide-35% |
R |
| Phosphoric Acid |
R |
| Skydrol | R |
| Sodium Hydroxide-50% |
R |
| Sulfuric Acid-98% |
R |
| Toluene |
R |
| Urea | R |
| Vinegar |
R |
| Xylene | R |
R-Recommended for continuous service
L-Limited Recommendation, occasional spills
*-May cause slight stain or discoloration |
MAINTENANCE
After completing the application of Epoxy.com Product #676
Novolac Epoxy Chemical Resistant Conductive Floor Coating, the
installer should provide the owner with maintenance instructions. Epoxy.com Product #676 Conductive Chemically Resistant Novolac Floor Coating is easily cleaned with neutral soaps or detergents.