Epoxy.com Product #647
General Purpose Heat Resistant Epoxy

[Home][Catalog of Products][Where to Start][Bonding Systems][Chip Floors]
[Chemical Resistance][Coatings][Conductive][Applications][Elastomeric & Polyurethane Systems]
[High Temperature][Industrial Floors][Epoxy and Urethane Injection][Joint Systems & Sealants]
[Mortars / Grouts][Polymer Systems]  [Primers & Sealers]  [Misc.]  [Seamless Flooring]
[Waterproofing][Dealers Wanted][Installation Tips][Product Guide][Wood Filler]
[Who We Are][FAQs][Guest Book][Guide Specs][Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format][Online- Ordering Authorization Form]

Epoxy.com Product #647 Heat Resistant Epoxy

DESCRIPTION

Epoxy.com Product #647 Heat Resistant Epoxy is a two component highly cross-linked novolac epoxy resin system. Epoxy.com Product #647 is especially formulated to be used as a high temperature potting or laminating resin. It is used to protect parts from high temperatures and corrosion. Epoxy.com Product #647 is 100% solids and has a convenient 2:1 by volume mix ratio and is easy to apply.

ADVANTAGES:

• Stable up to 400°F
• High chemical resistance to acids, alkalies and other chemicals
• Low viscosity allows penetration into fiberglass fabric to make high temperature composites
• Low viscosity allows filler loading for high temp epoxy potting

USES:

• Steel and Concrete Protective Surface where high temperatures are encountered
• Chemical processing plants and equipment
• Food and dairy processing plants
• Utility plants
• Plant maintenance coating
• Pipe coating
• Tank coating

PHYSICAL PROPERTIES:

CURED CHEMICAL RESISTANCE:

Acids, alkalies, alcohols, ketones, aromatics and other solvents.

SURFACE PREPARATION:

Remove dirt, loose particles and oil contaminants by scarification, sandblasting, etc See www.epoxy.com/surfaceprep.htm for more details.

MIXING:

Mix 2 parts "A" Component with 1 part "B" Component using a low-speed, 1/2" Epoxy.com - Mixing Paddle for 3-5 minutes. Apply immediately. High temperatures will shorten pot life.

APPLICATION:

Epoxy.com Product #647 can be applied by brush, roller, pour or spray.

Epoxy.com Product #647 can be easily made into a heat resistant epoxy grout by adding from 1 to 3 parts by volume of Epoxy.com Product #76 Epoxy Extender to the mixed epoxy.

COVERAGE:

Coating

Epoxy.com Product #647 is designed to be applied in two (2) coats at approximately 150 SF/gallon per coat.

Grout

3 gallons Epoxy.com Product #647 + (3) 48 lb. bags Epoxy.com Product #76 = 2,246 cu. in. per unit

“A” Component contains epoxy resin. DANGER! “B” Component contains alkaline amines; strong sensitizer. May cause skin sensitization or other allergic responses. Use with good ventilation, particularly if material is heated or sprayed. Prevent all contact with skin or eyes. Wear protective clothing, goggles, gloves and/or barrier creams. Keep container closed when not in use. Wash thoroughly after handling.

FIRST AID: In case of skin contact, immediately wash with soap and water. In case of eye contact, flush eyes with copious amounts of water for at least fifteen (15) minutes. Remove contaminated clothing shoes. If irritation persists, seek medical attention. Wash clothing before reuse.

KEEP AWAY FROM CHILDREN

FOR INDUSTRIAL USE ONLY

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 350 products,
Since 1980
Florida & Vermont
USA

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director
                          sales@epoxy.com

714-657-3826  Technical Support
                         Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666   Accounting and Administration
                         Debby Lambert, CEO, and CFO
                          office@epoxy.com

352-489-1625   Fax line to all Departments
                          www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

Copyright © 1994-2008 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

ThisEpoxy Systems™ Product Company ("ESI") warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;  Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight  Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days.   ESI warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of ESI. If any product fails to meet this warranty, the liability of ESI will be limited to replacement of any non-conforming material if notice of such non-conformity is given to ESI within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). ESI may in its discretion refund the price received by ESI in lieu of replacing the material. No customer, distributor, or representative of ESI is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of ESI. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. ESI reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. ESI'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND ESI SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

[Technical Data Sheets in Adobe Acrobat Format][MSDSs in Adobe Acrobat Format][Online- Ordering Authorization Form]

Secure Login