Air Plane Hangers and Garages

Here are a list of the products most frequently used for Air Plane Hangers, and high end residential garage floors.

Solid Color

• Product #1 All Purpose Coating - a 100% solids epoxy Hi-Build epoxy coating used for high foot and light forklift traffic areas where abrasion resistance is required; for protection against mild corrosion; and as a decorative waterproof coating for walls, floors, tanks, etc Available in normal, fast, and Cold Temperature Cure versions. It has good chemical resistance, but should not be subjected to sunlight for extended periods of time. Most economical choice when only light chemical resistance is need, and there is little or no sunlight exposure.

• Product #2 Chemical Resistant Coating - a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Available in normal, fast, and Cold Temperature Cure. Has excellent chemical resistance, important if there will be a lot of fuel spillage, etc.  This product is the most commonly used product for hangers, because of its excellent chemical resistance, and economy.

• Product #24 Pigmented Mortar - is a multipurpose colored epoxy binder for Epoxy.com Mortar Systems This all purpose epoxy resin is characterized as an excellent general purpose material with good clarity and color retention. It is essentially odorless and can therefore be used in occupied areas.  Best used when a thicker floor is needed to compensate for poor grade or finish on the concrete substrate.

• Product #24 Fast Pigmented Mortar - Fast Cure

• Product #24 Cold  Pigmented Mortar - Cold Temperature Cure

• Product #222 Water Based Epoxy - Epoxy.com Product #222 WATER BASED EPOXY COATING is a two component 100% reactive water based multifunctional epoxy resin coating. Epoxy.com Product #222 is manufactured to produce the utmost in performance in a safe, water borne coating. Epoxy.com Product #222 provides excellent resistance to salt intrusion, and excellent adhesion to most common construction substrates.

• Product #402  - 2 Component Chemical Resistant Coating -  is a two component₁ chemical resistant polyurethane coating with gloss finish offers excellent abrasion resistance, chemical and stain resistance, and color retention. Epoxy.com PRODUCT #402 can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangers, animal housing, and vehicle maintenance facilities. Product is not for use in California Use Product #406 when a California Compliant low VOC product is required, or desired.

• Product #406 - Two Component Low VOC Chemical Resistant Urethane Coating -  is a low VOC compliant urethane that meets all federal and state environmental air quality standards. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and superior color retention.Epoxy.com Product #406 can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangars, animal housing, and vehicle maintenance facilities. Available in both clear and pigmented formulations, Product#406 can be used as a finish coating option for most Epoxy.com Flooring Systems.

Multi Colored

• Product #315 Chip Flooring Product #315 is a seamless, plural component, liquid applied, 100% solids polymeric colored flake floor resurfacing system with superior wear, and chemical resistance. Product #315 with "multi-colored" flakes produces a durable, easy to maintain floor, on both new and old surfaces. The normal 315 Top Coat can be replace with clear Product #402  or clear Product #406 to create a sunlight forgiving  version of Chip Flooring.

Clear Sealers

• Product #223   Clear Water Based Epoxy Curing Compound, Sealer and Bonding Agent    is a two component water based epoxy curing that is used to both cure and seal concrete and to bond freshly placed concrete to existing concrete. It is ideally suited as a cure and seal for freshly placed concrete.  Its chemical resistance makes it ideal to seal: stamped concrete, acid stained concrete, concrete countertops, parapet walls, bridge pier caps, sealing floors in food processing areas, or any other area that requires a durable, chemical resistant concrete sealer.

• Product 870 (65% Solids - Penetrating Epoxy Sealer-  is a two-component penetrating epoxy sealer (with very high solids) designed for superior protection of new concrete or for prolonging the serviceability of partially-deteriorated concrete. The sealer is a low to medium viscosity material and is capable of providing an effective membrane barrier to inhibit moisture migration and corrosive chemical penetration. In the cured state Epoxy.com Product #870 allows moisture vapor transmission; it seals off moisture entry but still allows the concrete to breath. When applied to concrete placed and finished in accordance with standards defined in ACI 201 (Guide to Durable Concrete), Product #870 greatly improves wear resistance of the concrete surface, slows down the corrosion of reinforcing steel and adds many years' life to the structure. Product #870 has a solids content of 50% after curing. It may be applied to dry surfaces at temperatures of 40°F (0°C) or above.  

• Product #899 Epoxy Primer - a damp primer the is a 100% solids Low-Mod Low Viscosity Primer and Sealer. It may be used as a primer for any Epoxy.com ™ product, or as a stand alone sealer. This is the best choice if you need a clear sealer, but cannot tolerate the solvents during installation of solvented epoxy sealers like Product 870 (65% Solids - Penetrating Epoxy Sealer.