Epoxy.com Product #703
100% Solids Semi-Flexible Epoxy Adhesive
Epoxy Bonder | Epoxy Bonding Adhesive
DESCRIPTION
Epoxy.com Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder
is a 100% solids, moisture insensitive epoxy resin system, containing no
solvents. When mixed at a 2:1 ratio by volume, it produces a non-sagging
material that is ideal for repairs on vertical or overhead surfaces. Product
#703 Semi-Flexible Epoxy Gel Adhesive exceeds the requirements of ASTM C
881-87, Types I, II, and III Grade 3, Class "B", "C", "E" and "F". Epoxy.com
Epoxy Gel Adhesive has Zero (0) VOC. Since it has no VOC it makes it safer to
use, and meets even the strictest low VOC requirements
USES
- Repair and Assembly of Stone Monuments
- Stone Counter Top Bonding
- Sealing Joints in Plywood Substrates to Receive Epoxy.com Seamless
Flooring Systems
- Bonding Dissimilar Materials with Slightly Different Coefficient of
Expansion
- Patching
- General Purpose Bonding where a Semi-Flexible Adhesive is Required
ADVANTAGES
- Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder
will bond to damp or dry surfaces.
- Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder
may be feather-edged and will not shrink.
- Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder
is readily dispensed into narrow slots and holes from cartridge dispensers, or
concrete grout bags
- Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder
has excellent resistance to gasoline, oil, sewage and aggressive water.
- Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder is
100% solids Epoxy
- Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder has
Zero (0) VOC
- Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder meets
ASTM C 881-87, Types I, II, and III Grade 3, Class "B", "C", "E" and "F"
PHYSICAL PROPERTIES
| Gel Time @ 72° F (22.2° C) ± 2° |
30 minutes minimum |
Physical |
Tensile Strength @ 72° F (22.2° C)
(ASTM D 638) |
5,000 psi minimum (34.5 MPa) |
Linear Coefficient of Shrinkage on cure
(ASTM D 2566) |
0.005 |
Compressive Strength
(ASTM C 109 Modified) |
11,000 + psi minimum (75.8 MPa) |
Compressive Modulus
(ASTM D 695) |
200,000 + (1379 MPa) |
| Bond Strength (Slant Shear)
(ASTM C 882-78) |
7 days
2 day moist cure
14 day moist cure |
3,000 psi minimum (20.7 MPa)
1,000 psi + (6.9 MPa)
1,500 psi + (10.3 MPa) |
Electrical |
| Dielectric Strength, S/T |
Volt per mil 440-465 |
| Dielectric Constant |
60 HZ 3.4 - 3.5
106 HZ 3.3 - 3.4 |
| Power Factor |
60 HZ 0.006 - 0.007
106HZ 0.03 - 0.04 |
Installation
SURFACE PREPARATION
For best results, areas to receive the Product #703 Semi-Flexible
Epoxy Gel Adhesive Bonder should be free of laitance, grease, oil, and
any other contaminants that would inhibit bond. Sandblasting, waterblasting, or
wire brushing, or dust free grinding for surface preparation are recommended.
See Epoxy.com Surface Preparation Guide.
MIXING
Double Barrel Gun: With the use of static mixers in double
barrel guns, no prior mixing is required.
Mixing: For large volume jobs to be mixed in 5 gallon pails
or other suitable mixers where fillers such as Product #75 or other oven dry
silica sands are used, for best results combine two parts by volume of Component
"A" with one part by volume of Component "B" of Product #703
Semi-Flexible Epoxy Gel Adhesive Bonder in a clean pail, using a slow
speed drill and an Epoxy.com Mixing Paddle. Mix for a minimum of three
(3) minutes to a uniform consistency. To obtain a mortar, slowly add a maximum
of one part by volume of Product #75 Filler while continuing to mix.
COVERAGE
When used neat, a 3 gallon unit of Product #703 Semi-Flexible Epoxy
Gel Adhesive Bonder will cover approximately 80 square feet (7.4 m²) at
a 20 mil thickness. You can also consult he Epoxy.com
Neat (unfilled) Resin Calculator. When used as a mortar, a 3 gallon unit
of Product #703, mixed with 3 gallons by volume of #75 Filler,
will yield approximately 1,050 cubic inches of mortar. If using this as an
anchor bolt, or dowel bar adhesive, you can double check you volume with the
Epoxy.com Dowel Bar and Anchor Bolt
Adhesive Calculator.
LIMITATIONS
Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder should
not be applied when surface temperatures are below 40° F (4.4° C). For best
results, do not exceed one part by volume of #75 Filler
to one part by volume of mixed Product #703 Semi-Flexible Epoxy Gel
Adhesive Bonder .
CAUTION: WARNING!
A Component contains epoxy resin. DANGER! B Component contains
alkaline amines; strong sensitizer. May cause skin sensitization or other
allergic responses. Use with good ventilation, particularly if it is heated or
sprayed. Prevent all contact with skin and eyes. Wear protective clothing,
goggles, gloves and/or barrier creams. Keep container closed when not in use.
Wash thoroughly after handling.
FIRST AID: In case of skin contact, immediately wash with soap and
water. In case of eye contact, flush with copious amounts of water for at least
15 minutes. Remove contaminated clothing and shoes. If irritation persists, seek
medical attention. Wash clothing before reuse.
FOR
INDUSTRIAL USE ONLY / KEEP AWAY FROM CHILDREN
|
|
Proper mixing and installation is critical to the optimal success
of all product. See
Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
714-657-3826 Technical Support
352-533-2167 Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers. |
Copyright © 1994-2010 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four
(4) months; Power Tools and Equipment 90 days; Vinyl Esters,
High Molecular Weight Methacrylates (HMMA) and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
|