Mix one part by volume of Epoxy.com Product #432 to one part by
volume of water for a strong gel and minimal expansion. The water used
to react the product should be in the pH range of 7 to 9; water outside
of this pH range may affect eh final properties of the system. Gelling
will not take place when the pH is below 3 (acidic) or or above 10
(alkaline).
Epoxy.com #432 should be stored in temperatures of 50 to 80oF. For
long term storage, store at 40-50oF under dry conditions. Once a pail
has been opened, the effectiveness of the Epoxy.com #432 may be reduced
Clean Epoxy.com #432 from application equipment as quickly as
possible to prevent the material from forming a gel. Immediately after
use, hoses and pumps can be cleaned with acetone or acetone free
cleaner. Avoid conditions, which could cause ignition: e.g., heat,
sparks, open flames, etc. Epoxy.com #432can be pumped using hand or air
operated piston pumps. A nitrogen blanket moisture barrier is added to
the pail ofEpoxy.com #432to retard premature catalyses of resin in the
pail due to humidity.
Epoxy.com #432 contains T D I (Toluene Diisocyanate) and petroleum
distillate. Use in well ventilated areas. Avoid breathing vapors.
Avoid eye contact and repeated skin contact. Gloves and goggles are
recommended. A self-contained breathing apparatus should be worn in
confined spaces where T D I and solvent vapors are likely to be high.
Monitoring may be performed by using a simple badge monitor. The T D I
monitors are available from G.M.D. Systems, Inc. Consult MSDS for
further safety information.
The data, information and statements contained herein are believed to
be reliable, but are not to be construed as a warranty or representative
for which Epoxy Systems, Inc. assumes any legal responsibility. Since
field conditions vary widely, users must undertake sufficient
verification and testing to determine the suitability of any product or
process mentioned in this or any other written material from Epoxy
Systems, Inc. for their own particular use.
Proper mixing and installation is critical to the optimal success of all
product. See Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you have.
For more information please contact
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
375 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
714-657-3826 Technical Support
Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Copyright © 1994-2008 EPOXY.COM a
division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy
Systems™ Product Company ("ESI") warrants its products (when properly stored)
for the period of time as follows: Epoxies, Product #315, Product #315BC, and
Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2)
months and Polyurethanes Four (4) months; Power Tools and Equipment 90
days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all
other resins (not specifically mentioned above) 30 days; hand tools (non-power
tools) 30 days. ESI warrants that its products will be free of
manufacturing defects and will be in conformity with published specifications
when handled, stored, mixed and applied in accordance with recommendations of
ESI. If any product fails to meet this warranty, the liability of ESI will be
limited to replacement of any non-conforming material if notice of such
non-conformity is given to ESI within the warranty period for the material (as
indicated above), or within 1 year of the delivery of materials (whichever is
sooner). ESI may in its discretion refund the price received by ESI in lieu of
replacing the material. No customer, distributor, or representative of ESI is
authorized to change or modify the published specifications of this warranty in
any way. No one is authorized to make oral warranties on behalf of ESI. In order
to obtain replacement or refund the customer must provide written notice
containing full details of the non-conformity. ESI reserves the right to inspect
the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED
WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR PURPOSE. ESI'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY
UNDERTAKEN ABOVE AND ESI SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE
PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY,
WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of
our products are made on an individual order basis. Unless
authorized in writing by Epoxy Systems, Inc. in writing before the material is
made, there are no returns on items purchased from us, once the order has been
processed, and the material made. In the event of authorized returns a
restocking charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on non-list
priced items. All Returns are for merchandise (store) credit only, no cash
or credit card credits. In the event of a return, buyer is responsible for
the cost of shipping and handling in both directions.
[Technical
Data Sheets in Adobe Acrobat Format][MSDSs
in Adobe Acrobat Format][Online-
Ordering Authorization Form]
Secure Login