| ||||||||||||||||||||||||||||
| HANDLING PROPERTIES | |
| Mix Ratio | 3.5 to 1 by Volume |
| Color | straw |
| Mixed Viscosity (@77 Degrees F) | 275-350 CPS |
| Gel Time | 12 - 15 Minutes |
| Shelf Life: (@85 Degrees F Maximum Temp) | 1 Year |
| Initial Cure | 24 hours |
| Final Cure | 7 days |
| PHYSICAL PROPERTIES | |
| Elongation (ASTM D-638) | 1.6% |
| Tensile Strength (ASTM D-638) | 6,970 p.s.i (Min.) |
| Modulus of Elasticity (ASTM D-638) | 444,800 |
| Compressive Strength (ASTM C109-75) | 12,220 |
| Bond Strength, 7 days @ 77°F (AASHTO T237-73) | 7,380 |
SURFACE PREPARATION: Drilling of cracks for injection ports is best accomplished with a vacuum attached to a swivel drill chuck and hollow core drill bits. The surface of the crack and the area around the injection ports should be sealed with Epoxy.comTM Product #5, 6 or 48. Entry ports for injecting should be spaced at appropriate intervals to accomplish the full penetration of the resin. As with all injection resins, use of a plural component epoxy injection machine is the only way to insure desired results.
MIXING PROCEDURES: Supplied as two-package system. Pour Component "B" into the injection machine container labeled "B". Pour the Component "A" into the injection machine container labeled "A". Use special caution not to intermix components, or with different injection resins.
APPLICATION STEPS: Epoxy.com Product #3 should only be pumped with a positive displacement injection machine. See technical data on Concrete Injection Procedures.
HANDLING PRECAUTIONS
Prolonged or repeated exposure may cause eye and skin irritation. Avoid contact with skin or eyes. If contact occurs, wash immediately with soap and water. Flush eyes immediately with water and contact physician. If used indoors, provide adequate ventilation. Use safety glasses, and wear protective rubber or polyethylene gloves.
For more information on injection procedures , injection accessory products or other Epoxy.com Products, please contact:
|
Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have. For more information please contact: Epoxy.com Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). 321-206-1833 Customer Service - Ordering and Order Status 714-657-3826 Technical Support 352-489-1625 Fax line to all Departments Website: www.epoxy.com 24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Copyright © 1994-2010 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont. All rights reserved. Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. Epoxy.com a division of Epoxy Systems, Inc. warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability. Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.
[Home] [Catalog of Products]
[Where to Start] [[Bonding Systems]
[Chip Floors] [Chemical Resistance]
|
