Chemical Resistant Epoxy Floor Coating
100% Solids Epoxy Resin Floor Coating
To Protect Concrete, Steel and Other Materials
Epoxy.com Product #2
GENERAL DESCRIPTION
Chemical Resistant Epoxy Floor Coating Product #2 a two component, 100% solids, Zero "0" VOC epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Chemical Resistant Epoxy Floor Coating Product #2 is ideal for most chemical resistant flooring applications.
Chemical Resistant Epoxy Floor Coating Product #2 is also an excellent Chemical Resistant Tank Lining. Chemical Resistant Epoxy Floor Coating is also available in a thicker version making installation on walls and ceilings easier as Chemical Resistant Epoxy Wall Coating Product #2W.
Application of Chemical Resistant Floor Coating #2
Typical Uses
- Assembly Plants
- Bakeries
- Basement Floors & Walls
- Block Walls
- Bottling Plants
- Break Rooms
- Cafeterias
- Canning Plants
- Car Washes
- Cells
- Chemical Processing Areas
- Chemical Pump Areas
- Chemical Storage Area
- Church Floors
- Classroom Floors
- Corridors
- Educational Facilities
- Entrances
- Filters
- Food Plants
- Fork Lift Areas
- Health Care Facilities
- Hospitals
- Kennels
- Kitchens
- Laboratories
- Law Enforcement Facilities
- Laundries
- Leveling concrete
- Loading docks
- Locker Rooms
- Machine Shops
- Manufacturing Areas
- Marine Surfaces
- Meat Preparation Areas
- Mortuaries
- Nuclear Plant Floors
- Offices
- Patching concrete
- Photography Processing Areas
- Power Plants
- Printing Plants
- Produce Preparation Areas
- Pools
- Ramps
- Research Facilities
- Rest Rooms
- Restaurants
- Secondary Chemical Containment
- Semiconductor Plants
- Sewer Plants
- Shops
- Shopping Centers
- Shower Rooms
- Stores
- Show Rooms
- Supermarkets
- Tanks
- Veterinary Facilities
- Water Plants
- Warehouses
- & many others
ADVANTAGE
- Excellent chemical resistance
- Strong yet resilient
- Built in flexibility
- Sprayable
- Meets USDA standards
- 100% Solids - 0.0 lbs VOC
SURFACE PREPARATION
Surface to receive Chemical Resistant Epoxy Coating Product #2must be clean and sound. Remove all dirt, laitance, grease curing compounds and other foreign matter by sandblasting, or mechanical abrasion. Remove water and dust from all surfaces with an oil free blast immediately prior to application. See Epoxy.com' Surface Preparation Guide form more details.
MIXING INSTRUCTIONS
Temperature of Chemical Resistant Epoxy Coating Product #2 must be 50° F or above at time of mixing. Stir each component separately before blending. Mix two parts by volume of Part A with one part by volume of Part B for three minutes with a low speed electric drill motor equipped with a mixing paddle.
APPLICATION
Product #899 Epoxy Primer is recommended for concrete surfaces. Apply Product #2 Chemical Resistant Epoxy Floor Coating with a roller, brush, or spray equipment. When used as a chemical resistant flooring application, Product #2 Chemical Resistant Epoxy Floor Coating can be applied with a squeegee and back-rolled. Two coats are recommended. Thickness per coat should be 7-10 mils. Seven days cure time is required to reach maximum chemical resistance. For more information before installing please see Epoxy.com installation tips at https://www.epoxy.com/install.htm.
LIMITATIONS
Refer to Product #2 Chemical Resistant Epoxy Floor Coating Chemical Resistance Chart for field tested results of common industrial chemicals that Product #2 has been exposed to. New concrete should be at least 28 days old. Temperature of substrate must be above 50° F. DO NOT thin.
SAFETY PRECAUTIONS
Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.
CLEANING
All tools and equipment should be cleaned before the system gels. Use MEK, Acetone, or any lacquer solvent.
APPLICATION PROPERTIES at 77° F |
|
| Mix Ratio | 2:1 By Volume |
| Viscosity (mixed) | 1800 CPS |
| Pot Life (200 gr.) | 40 minutes |
| Tack Free to Touch | 6-8 Hours |
| Initial Cure | 24 Hours |
| Final Cure | 7 Days |
| Packaging (unit size) | 3 gal., 15 gal. |
| Standard Colors | Black, White, & Colors Listed Below |
Click
the picture of
color card below for a larger version of this picture of the color chart.
Please note: The picture to the right is a photographic reproduction of
the color card for this product. The photo reproduction process and your
monitor and/or printer will change these colors. This chart is to give you an
idea of the colors available and not intended for critical color selections.
TENSILE PROPERTIES |
|
| Tensile Strength (ASTM D-638) | 5500 psi min. |
| Elongation | 10% |
Chemical Resistance
See the Chemical Resistance Chart for Chemical Resistant Epoxy Coating Product #2 set side by side with other commonly used Epoxy.com Coating Systems.
Other customers who visited this page also visited:
Product #1 is an all Purpose Epoxy Floor Coating. With good chemical resistance. Product #1W is a wall Grade Version of Product #1. Product #1W All Purpose Epoxy Coating with good chemical resistance is excellent for coating block walls, concrete walls, steel walls, and most standard wall construction materials. .
Product #2W Chemical Resistant Epoxy Wall Coating is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Product #2W Chemical Resistant Epoxy Wall Coating is excellent for coating block walls, concrete walls, steel walls, and most standard wall construction materials.
Product #630 Novolac Chemical Resistant Flooring System is a high end chemical resistant flooring system, chemical resistant coating and chemical resistant mortar binder. Product #630 Novolac Chemical Resistant Flooring System is a 100% solids epoxy Novolac ideal for harsh chemical and solvent resistant applications. It is ideal for use as a troweled mortar, slurry binder, and coating for concrete and steel in extremely corrosive areas where resistance to 98% sulfuric acid or other strong caustics is needed. Product #630 Novolac Coating/Mortar Binder is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities.
Product #630 Novolac Chemical Resistant Coating is also available in a wall grade version making it an excellent for coating block walls, concrete walls, steel walls, and most standard wall construction materials where very high chemical resistance is required..
Product #630 Conductive Chemical Resistant Conductive Flooring is a 100% solids epoxy Novolac Conductive coating based on Product #630 Novolac Chemical Resistant Flooring System with conductive fillers. Product #630 Conductive Chemical Resistant Conductive Flooring is ideal for severe chemical and solvent storage requiring conductive and spark proof surfaces. Applied at a nominal 1/16 inch, the Product #630 Conductive Chemical Resistant Conductive Flooring offers the superior chemical resistance of a Novolac Resin System while maintaining a conductive surface.
Product #633 - Epoxy Novolac Floor Coating - extremely chemical resistant epoxy floor coating. Product #633 Novolac Epoxy Floor Coating is resistant to chemicals at high concentrations, or for extended period of time.
Epoxy Chip Flooring System is an excellent mid range chemical resistant flooring system. Epoxy Chip Flooring system can be made a highly chemical resistant epoxy flooring system by glazing with Product #630 Novolac Coating/Mortar Binder - a 100% solids epoxy Novolac ideal for harsh chemical and solvent resistant applications.
For more information see the Epoxy. Coatings Page.
Click Here for The Coatings Calculator or use the table below
Material Required Per 1000 SF | |||
| Good | SF/ Gal | Thickness in Mils | Gallons |
| 1 Coat 899 Primer Pigmented | 250 | 6.4 | 4 |
| 1 Coat of 1 Pigmented | 200 | 8 | 5 |
| Total | 14.4 | ||
| Better than Good | |||
| 1 Coat 899 Primer Pigmented | 250 | 6.4 | 4 |
| 1 Coat of 1 Pigmented | 160 | 10 | 6.25 |
| Total | 16.4 | ||
| Much Better | |||
| 1 Coat 899 Primer Clear | 250 | 6.4 | 4 |
| 1 Coat of 1 Pigmented | 200 | 8 | 5 |
| 2nd Coat of 1 Pigmented | 200 | 8 | 5 |
| Total | 22.4 | ||
| Best | |||
| 1 Coat 899 Primer Clear | 250 | 6.4 | 4 |
| 1 Coat of 1 Pigmented | 160 | 10 | 6.25 |
| 2nd Coat of 1 Pigmented | 160 | 10 | 6.25 |
| Total | 26.4 | ||